The iKettle 2.0 network isn’t showing on my list of possible WIFI connections?

If you can not see the iKettle 2.0 emitting in your WIFI settings please try the below helpful tips:

  1. Ensure you are near your iKettle 2.0 during the set up
  2. We advise to be as close to your router as possible (device and product)

If you still can not see it, try resetting as per the below instructions.

A couple of things to bear in mind before completing a full reset are that you must be connecting to a 2.4GHz router and the setup of the iKettle must be performed next to your router (it can then be moved after the set up).

The steps are as follows, please follow them in the correct order:

1) Press and hold down the button on the base for 10 seconds until you hear three beeps.

2) Unplug the base, wait 10 seconds and plug it back in.

3) Delete and reinstall the app from your device.

4) Make sure your device is connected to your home network under settings and WIFI.

5) Turn your WIFI off for a few seconds and then on again, to refresh the connection.

6) Open the iKettle app and follow the set up instructions.


If you need to get in touch, Smarter Support is open Monday to Friday 9am - 5:00pm GMT and can be contacted via the 'Contact Us' section on our website by clicking the following link: Contact Us



Have more questions? Submit a request


Please sign in to leave a comment.